Fox 2017+ Ford Superduty 2.0 Perf Series 8.1in. TS Stabilizer Steering Damper 1-1/8 in Tie Rod

Fox 2017+ Ford Superduty 2.0 Perf Series 8.1in. TS Stabilizer Steering Damper 1-1/8 in Tie Rod

Marsoni

M251S

$187.97

Get it in 3 business days with 1 day shipping. Friday, May 29

Fox 2017+ Ford Superduty 2.0 Perf Series 8.1in. TS Stabilizer Steering Damper 1-1/8 in Tie RodSKU: 985 02 132 UPC: 788000424407 Fox 2017+ Ford Superduty 2. 0 Perf Series 8. 1in. TS Stabilizer Steering Damper 1 1 8 in Tie Rod This Fox 2. 0 Performance Series steering stabilizer restores precise steering control to 2017 2023 Ford F 250 and F 350 Super Duty trucks equipped with 1 1 8 inch tie rods. Race proven damping technology absorbs road imperfections for a smooth on road ride while providing confident handling during off road use. MPN 985 02

Easy Shipping

Quick Dispatch:

Your Fox 2017+ Ford Superduty 2.0 Perf Series 8.1in. TS Stabilizer Steering Damper 1-1/8 in Tie Rod orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your Fox 2017+ Ford Superduty 2.0 Perf Series 8.1in. TS Stabilizer Steering Damper 1-1/8 in Tie Rod ships.

Need Help?
Questions about Fox 2017+ Ford Superduty 2.0 Perf Series 8.1in. TS Stabilizer Steering Damper 1-1/8 in Tie Rod, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for Fox 2017+ Ford Superduty 2.0 Perf Series 8.1in. TS Stabilizer Steering Damper 1-1/8 in Tie Rod in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on December 16, 2020

Verified Purchase

Marina De Leon

New York, US

★★★★★ 5

Nice

Size: 16AWG Wiring Harness-2 Leads

Worked great, easy to install

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on January 8, 2026

Verified Purchase

Dan from Georgia

Grantham, US

★★★★★ 4

Wire length between the two connectors is short for a full-size pickup

Size: 16AWG Wiring Harness-2 Leads

I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on June 1, 2025

Verified Purchase

Nate Higgers

Fort Morgan, US

★★★★★ 5

great value

Size: 16AWG Wiring Harness-2 Leads

very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on April 30, 2026

Verified Purchase

Lee Mintz

Lowell, US

★★★★★ 5

The Easiest!

Size: 16AWG Wiring Harness-2 Leads

This is one of the best and easiest wiring system to install that I have every used. And the price is great!

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on June 11, 2025